Project overview
MANUFACTURING FACILITY AMENITIES POWER SUPPLY
Electrical infrastructure installed to supply new relocatable lunchroom and amenities buildings at an expanding manufacturing facility.
Customer need
A rapidly expanding manufacturing site required power to new relocatable lunchroom and amenities buildings. The significant distance from the accessible supply created a voltage-drop consideration, and the installation needed to minimise disruption to production.
What we did
- Utilised existing spare underground conduits covering over half the route.
- Installed an additional 60 m of underground conduit and a new pit.
- Hauled more than 160 m of cable to supply the buildings.
- Installed a distribution board and submains to each building.
- Completed equipotential bonding, testing and commissioning.
How it helped
The underground mains were installed with minimal disruption to site operations. The final connection was completed at the end of shift, limiting the power outage to less than 30 minutes and reducing the impact on production. The new distribution board also provided capacity for additional future power demand.
Related services
Related projects
All projects ↗︎
Mine site pump VSD & control system
What we didDesigned and built the VSD and control system, including the control panel, programming and electrical documentation.
How it helpedThe equipment passed introduction to site without delay and operated for the duration of the project without issue.
Read the project
75 kW compressor fault investigation
What we didCaptured the intermittent fault during motor startup and compared it with normal starting conditions.
How it helpedCapturing the fault provided evidence that was unavailable during the initial inspection.
Read the project
Mine site pump control systems
What we didDesigned and built two identical pump control systems.
How it helpedThe mobile skid and plug-in supply simplified transport, setup and connection onsite.
Read the project